Creative Memories Project Center - Traditional

Reminisce Christmas Addition US

Espresso Cardstock US

Espresso Cardstock CA

Scallop Circle Maker US

Scallop Circle Maker CA

Circle Maker US

Circle Maker CA

All-Purpose Scissors US

All-Purpose Scissors CA

Shipping Tag

Jute

How to create Green Christmas Tag:

Adhere Reminisce Christmas green pattern paper to the shipping tag, using an All-Purpose Scissors to trim off the excess.

Using the Medium Circle Pattern, (inside of template) and the Red Blade, cut a circle from the red Reminisce Christmas pattern paper. Adhere this on the top left side, as shown, wrapping half around to the back side.

Apply clear sticker “Family is the best part of Christmas” across the bottom of tag.

Using the Circle Maker, punch a 1-1/2" circle from Espresso Cardstock. Using an All-Purpose Scissors, make thin cuts toward the center and ruffle the edges to make "frills".

Using the Small Circle Pattern (inside of template) and the Blue Blade, cut a circle from the red pattern paper. Adhere to the center of the frilly circle and adhere a ribbon, as shown. Adhere to the tag, using a Foam Square.

Type TO: and From: (using Microsoft Word). Print in red ink and cut into a 1-3/4" x 1" rectangle. Adhere, as shown.

Using a ruler and Fine-tip Black Pen, make a line around the edges of the tag.

Add jute to finish the tag.

Create tag using:

Reminisce Christmas Addition CA

French Vanilla Cardstock US

French Vanilla Cardstock CA

Espresso Cardstock US

Espresso Cardstock CA

Circle Maker US

Circle Maker CA

All-Purpose Scissors US

All-Purpose Scissors CA

Fine-tip Black Pen US

Fine-tip Black Pen CA

Shipping Tag
Twine
Ribbon
Jute

How to Create "To" and "From" Tag:

Adhere the Cheerful Christmas red & white stripe pattern paper to the shipping tag, using an All-Purpose Scissors to trim off the excess.

Using the Tag Maker, punch 2 tags from Green Cardstock. Adhere to tag, as shown, wrapping the excess around to the back side.

Using a Foam Square, adhere gift sticker on left side.

Apply To:/From: sticker on the right side.

Using the Circle Maker, punch a 1-1/2" circle from the red pattern paper. Adhere to the top of the tag, bending a portion of the top around to the back side of the tag. Punch a 1-1/4" circle from the solid red paper. Apply the “Cheer” sticker and adhere to the center of the larger circle.

Fold a 5" stripe of ribbon (ends snipped into a "v") in half and adhere to the back side of the tag.

Apply the holly sticker.

Create "To" and "From" tag using:

Shipping Tag

Green Ribbon

Projects Designed by:

Liana Suwandi

Categories:

Online Scrapbooking

Scrapbooking Projects

Scrapbooking Gift Tags

Posted on 12/12/2010 at 12:01 AM in 2010 12 Days of Christmas, All Traditional, Christmas Project Ideas, Holiday Project Ideas, Project Idea of the Day | Permalink | Comments (0)

12/11/2010

Twelve Days of Christmas Project Idea - Day 11 - December 11, 2010

How to create Paper Wreath:

Cut (6) 12" x 12"sheets of Cheerful Christmas Addition paper in half, then cut 1" x 6" strips.

Fold the strips over being careful not to make any creases. Staple the strips to the styrofoam, overlapping 1/4 to 1/2 of the paper loop before it.

Do this until you fill your wreath, tucking in extras if you missed a spot. Sometimes I even folded the loops up a little, once it was stuck to the wreath to make it look fuller.

Add a ribbon to hang!

Create project using:

1 Styrofoam 12" wreath

1 Ribbon

Stapler

Project Designed by:

Rita Barakat

Categories:

Scrapbooking Gift Ideas

Altered Scrapbooking Projects

Holiday Home Decor Ideas

Posted on 12/11/2010 at 12:01 AM in 2010 12 Days of Christmas, All Traditional, Christmas Project Ideas, Holiday Project Ideas, Project Idea of the Day | Permalink | Comments (2)

12/10/2010

Twelve Days of Christmas Project Idea - Day 10 - December 10, 2010

How to create Holiday Candle Wrap:

Using the Wavy Tearing Tool on the two long sides, tear the Red Cardstock to 11” x 3-3/4”.

Using the present paper from the Cheerful Christmas Addition, trim to 11” x 2-3/4". Adhere across the Red Cardstock, centering.

Tightly wrap the papers around the candle so that the ends meet in the back and secure with a piece of tape.

Using the Medium Circle Pattern (inside of template) and the Green Blade, cut a circle from the Red Cardstock. Place a Foam Square on the back of the circle and adhere to the front of the candle wrap.

Using the Medium Circle Pattern (inside of template) and the Blue Blade, cut a circle from the White Cardstock. With the Fine-tip Red Pen, place dashes around the edges of the white circle. Apply the “joy” sticker from the Cheerful Christmas Addition (Clear Title Stickers) to the center of the circle. Adhere a small jewel to the sticker in the center of the blue icon. Place a Foam Square on the back of the circle and adhere on top of the red circle, centering.

Tie twine around the candle, behind the circle and finish in a knot to the side of the circle as shown. Trim as desired.

Finished Size: 3" x 6"

Create Project Using:

Red Cardstock US

Red Cardstock CA

Fine-tip Basic Pen Set US

Fine-tip Basic Pen Set CA

Wavy Tearing Tool US

Wavy Tearing Tool CA

3" x 6" Candle

Jewel Accent

16" Twine

Project Designed by:

Jamie Cripps

Categories:
Scrapbooking Gift Ideas
Altered Scrapbooking Projects
Holiday Scrapbooking Ideas

Posted on 12/10/2010 at 12:01 AM in 2010 12 Days of Christmas, All Traditional, Christmas Project Ideas, Project Idea of the Day | Permalink | Comments (0)

12/09/2010

Twelve Days of Christmas Project Idea - Day 9 - December 9, 2010

How to create "JOY" garland:

Using the CCS Large Circle Pattern (inside of template) and the Red Blade, cut 4 circles from Espresso Cardstock.

Using the same pattern (inside of template) and the Green Blade, cut 4 additional circles from the Reminisce Christmas pattern paper.

Apply Simple Monogram Stickers (brown) “J" and "Y” to two of the smaller circles. Use the wreath sticker to replace the letter “O”.

Apply the clear sticker “Season’s Greetings” on top of wreath sticker.

Cut apart the clear sticker “May the joys of Christmas" from the "be yours" and apply the first part across the last smaller circle.

Using the Circle Maker, punch a 1-1/4" circle from Espresso Cardstock. Apply the "be yours" clear sticker. Adhere below the "May the Joys", using Foam Squares.

Position the 4 Espresso circles side-by-side with approx. 1/4" spacing between each one. Center a 40" piece of lace across the four circles (allowing an even excess amount on each end). Adhere the smaller circles on top in the proper order.

Cut a "v" in one end of (2) 2-1/2" pieces of green ribbon. Adhere one to each end of the circles.

Apply additional stickers.

Finished size: 40" x 3-3/8"

Create Project Using:

Reminisce Christmas Addition US

Reminisce Christmas Addition CA

Espresso Cardstock US

Espresso Cardstock CA

Simple Monogram Stickers US

Circle Maker US

Circle Maker CA

Simple Monogram Stickers CA

Reminisce Tone-on-Tone Paper US

White Lace

Green Ribbon

Project Designed by:

Liana Suwandi

Categories:

Scrapbooking Decorating Ideas

Altered Scrapbooking Projects

Holiday Scrapbooking Ideas

Posted on 12/09/2010 at 12:01 AM in 2010 12 Days of Christmas, All Traditional, Christmas Project Ideas, Holiday Project Ideas, Project Idea of the Day | Permalink | Comments (1)

12/08/2010

Twelve Days of Christmas Project Idea - Day 8 - December 8, 2010

How to create Ball Ornaments:

Using the CCS Medium Circle Pattern (inside of template) and the Red Blade, cut 9 circles from assorted colors of Reminise pattern paper. (8 of these circles will be used for the ornament, the 9th will be used to create a triangle).

On one of the circles, draw an equalateral triangle (all three sides should be equal in length and the points will be touching the edge of the circle).

Trace the triangle onto the inside of each of the 8 other circles. Score, using the Rotary Scoring Blade, and fold along all the lines.

Using the Tape Runner, join one flap each from two circles - triangles should point in the same direction. Using the same technique, adhere the flaps of two more circles to these two, forming what will be the top. Make the bottom in the same way, adhering all of the flaps.

If desired, you can use Precision Point Adhesive to glue together any large gaps where the flaps meet.

Use a needle and thread to create a small hole and hang from the thread.

Finished size: Approximately 3" in diameter

How to Create Lollipop Ornaments:

Using the CCS Large Circle Pattern (inside of template) and the Blue Blade, cut 2 circles from the Reminisce pattern paper (you will use these for the front and back of the ornament).

Trim (2) 2" x 12" strips of matching pattern paper.

Fold over one strip of paper 1/2". Flip over and fold again 1/2" so that the paper starts looking like an accordion. Continue folding this way for the entire length of paper. (For more precise folds you can use your Scoring or Perforating Rotary Blade. I used the Perforating Blade.)

Repeat accordion fold technique on the second strip of paper.

Place the end of one accordion strip onto the end of the other strip, overlapping one or two folds. Adhere using Tape Runner.

Twist the other ends of the accordion strips around. You may have excess length that you'll want to cut off, depending on how "tight" you want your folds to appear. Use the Tape Runner to hold the ends together.

Now, squish the circle and try to make the center hole as small as possible. Put hot glue around the center, getting inside the accordion grooves as best as you can.

Adhere one of the previously cut circles over the hot glue, centered. Repeat with the back side. Apply a sticker to the front, using Foam Squares.

Use a needle and thread to create a small hole in the circle on the back of the ornament and hang from the thread.

Finish Size: Approximately 4-3/4" in diameter

Create Projects using:

Reminisce Tone-on-Tone Paper CA

Reminisce Designer Print Paper US

Reminisce Designer Print Paper CA

Precision Point Adhesive US

Tape Runner US

Tape Runner CA

Precision Point Adhesive CA

Reminisce Christmas Addition US

Scoring Rotary Blade US

Scoring Rotary Blade CA

Needle and Thread

Hot Glue Gun

Projects Designed by:

Jen Martakis

Categories:

Scrapbooking Tree Decorations

Altered Scrapbooking Projects

Holiday Scrapbooking Ideas

Posted on 12/08/2010 at 12:01 AM in 2010 12 Days of Christmas, All Traditional, Christmas Project Ideas, Holiday Project Ideas, Project Idea of the Day | Permalink | Comments (2)

12/07/2010

Twelve Days of Christmas Project Idea - Day 7 - December 7, 2010

How to create Reminisce Christmas Tree:

Use the Brick Cardstock as a base. Wrap it around the styrofoam cone and adhere.

Once the cardstock is adhered, cut off all extra paper with All-Purpose Scissors so the cardstock is flush with the styrofoam cone.

Using the Circle Maker, begin punching 1-1/2" circles from various pieces of the Reminisce Christmas Additions. You should have approximately 55-60 circles total.

Using the Circle Maker, punch approximately (11) more 1-1/2" circles from the Reminisce Christmas paper, leaving a 3/4" straight edge on the bottom of each circle.

Peel 3 stickers from the sticker sheet (I chose the red "Merry Christmas", "Tis The Season", and "December 25" stickers) and apply to red pattern paper. Use the 1-1/2" Circle Maker to center over the sticker and punch to make them circular.

Starting at the bottom of the cardstock covered styrofoam, adhere the straight edge circles with Tape Runner adhesive, overlapping each circle by approximately 1/4" to cover most of the cardstock base.

On the second row start using the full circles and begin the row in between 2 circles from the bottom row. Alternate circles randomly for a colorful effect throughout the tree.

Adhere the sticker circles near the center, but not all together.

Continue adhering circles until they come to the top of the cone. The top row of circles should go above the cone by 1/2".

Free-hand cut (or trace) 2 stars from the red patterned paper. Adhere stars together using Foam Squares.

Place a straight pin in between the stars, securing with Foam Squares and stick into the top of the cone.

Finished Size: Approx. 13" tall

Create Project Using:

Reminisce Christmas Addition CA

All-Purpose Scissors US

All-Purpose Scissors CA

Styrofoam Cone, approximately 9" tall

Project Designed by:
Christa Paustenbaugh

Categories:

Scrapbooking Home Decor Ideas

Altered Scrapbooking Projects

Holiday Scrapbooking Ideas

Posted on 12/07/2010 at 12:01 AM in 2010 12 Days of Christmas, All Traditional, Christmas Project Ideas, Holiday Project Ideas, Project Idea of the Day | Permalink | Comments (3)

12/06/2010

Twelve Days of Christmas Project Idea - Day 6 - December 6, 2010

How to create Grapevine Wreath Ornament:

Wrap an entire strip of the 1/2" z-fold Very Merry Paper Ribbon around the entire 6” grapevine wreath. Create a fold at the end of the Paper Ribbon and adhere to the opposite end of the Paper Ribbon on the wreath.

Cut (2) 1/2" x 6” strips of silver metallic paper and fold one end in half, creating a loop and snip a reverse ‘V’ at the end. Adhere both pieces together creating a ribbon tie.

Cut (2) 1" x 12" strips of printed paper. Create a zig-zag fold every other direction. Adhere one end of each zig-zag strips together, creating one long strip.

Using the Circle Maker, cut (2) 1-1/4" circles from pattern paper. Form the zig-zag strips into a circle and adhere one side to one of the circles to secure zig-zag circle shape. Adhere the another 1-1/4" circle piece to the front. Apply an epoxy sticker and printed title ‘Happy Holidays’.

Trim three pattern papers to 1/4" x 8". Using the All-Purpose Scissors,curl both ends of each strip. Adhere the strips to the wreath.

Adhere the metallic ribbon ties using Foam Squares to the center of the 1/4" curled strips and adhere the zig-zag circle flower to the center of the metallic ribbon tie.

Finished Size:
6”

Create Project Using:

Ltd. Ed. Very Merry Paper Pack US

Ltd. Ed . Very Merry Paper Pack CA

Ltd. Ed. Very Merry Embellishments US

Ltd. Ed. Very Merry Embellishments CA

6" Grapevine Wreath

Project Designed by:

Cindy Liebel

Categories:

Scrapbooking Gift Ideas

Altered Scrapbooking Projects

Holiday Scrapbooking Ideas

Scrapbooking Tree Decorations

Scrapbooking Christmas Projects

Posted on 12/06/2010 at 12:01 AM in 2010 12 Days of Christmas, Christmas Project Ideas, Holiday Project Ideas, Project Idea of the Day | Permalink | Comments (2)

12/05/2010

Twelve Days of Christmas Project Idea - Day 5 - December 5, 2010

How to create Christmas Recipe Clip:

Clothespin:

Cut two 1-3/8” x 5-3/4” strip of the red snowflake paper. Adhere to the front and back of the clothespin.

Adhere two 5-3/4” strips of the brown and red patterned Paper Ribbon to each side.

Adhere the Christmas tree and blue snowflake epoxy stickers to the front as shown from the Very Merry Embellishment Pack. Adhere the reindeer epoxy sticker to the bottom of the clothespin back.

Using large foam squares, adhere the gingerbread girl and boy to the front as shown.

Tie a ribbon bow through the metal clothespin as shown.

Recipe Card:

Using Storybook Creator Plus 3.0, create a custom size 5” x 3.5” card. Using the Very Merry Digital Kit, place the Dear Santa Very Merry paper enlarged as shown.

Add the Very Merry Ribbon #1 as shown across the top. Add the Very Merry Ribbon #2 as shown right below Ribbon #1.

Add your recipe title.

Insert the Peppermint Candy embellishment as shown. Under the Format tab, add drop shadow. Add a photo. Under the “Cut & Fill” tab, click Ellipse and flatten. Click “make circle”. Click “erase the shaded area” and flatten. Center the image on the Peppermint Candy embellishment.

Insert the Dear Santa embellishment. Under the Cut and Fill tab, select the magic wand. Select the entire tree. Choose “copy the selected area”. Delete the original Dear Santa embellishment. Align the tree along the right side of the card as shown. Select the Tree layer. Right-click and select “copy”. Under the Arrange tab on the Rotate section, click “flip horizontally” and align along the left side of the card as shown.

Insert the Dear Santa embellishment. Under the Cut and Fill tab, select the magic wand. Select the reindeer. Choose “copy the selected area”. Delete the original Dear Santa embellishment. Under the Format tab, add drop shadow and align reindeer in front of the tree on the right side of the card.

Print the recipe card and insert into the clothespin.

Create Recipe Clip Using:

Very Merry Addition Paper Pack US

Very Merry Addition Paper Pack CA

Very Merry Embellishment Pack US

Very Merry Embellishment Pack CA

Very Merry Digital Kit PC US

Very Merry Digital Kit PC CA

Very Merry Digital Kit Mac US

Very Merry Digital Kit Mac CA

Font: Ringbearer & Arcena

Large Clothespin

Rafia

Project Designed by:
Jill Klasen

Categories:

Scrapbooking Gift Ideas

Altered Scrapbooking Projects

Holiday Scrapbooking Ideas

Digital Altered Projects

Posted on 12/05/2010 at 12:01 AM in 2010 12 Days of Christmas, All Traditional, Christmas Project Ideas, Holiday Project Ideas, Project Idea of the Day | Permalink | Comments (3)

12/04/2010

Twelve Days of Christmas Project Idea - Day 4 - December 4, 2010

How to Create Wreath Card:

Using the Green Cardstock and the Medium Circle Pattern (outside of template) and the Green Blade, cut a 5-1/4" circle. This will be the card base.

With the present paper from the Cheerful Christmas Addition, cut a second circle same as above. Leaving the Circle Pattern in place, change to the Red Blade and cut a 2-1/2" circle from the inside of the template, making certain to leave a 3/4" section of the circle un-cut. This will be the piece that lifts up.

Place adhesive on the present side of the large circle, leaving the small circle without adhesive, and adhere to the Green Cardstock circle.

Using the Small Circle Pattern (inside of template) and the green side of the present paper from the Cheerful Christmas Addition, cut seven 1-1/2" circles using the Red Blade and nine 1” circles using the Blue Blade. Randomly adhere circles to the wreath, placing Foam Squares under four of the circles.

Trace the center circle cut with a Red Fine-Tip pen, making dashes then add the “season’s Greetings” Cheerful Christmas Addition Clear Title Stickers to the center.

With the Medium Circle Pattern (inside of template) and White Cardstock, cut a 2” circle using the Blue Blade. Using the Red Fine-Tip Pen, add dashes to the outer edge of the circle. Adhere the “ho ho ho!” Cheerful Christmas Addition Clear Title Stickers toward the top of the circle.

Trim a photo with Medium Circle Pattern (inside of template) to a 2-1/2" circle using the Red Blade. Adhere the photo to the inside of the wreath, under flap.

To create accordion flower, cut a 1” x 10” piece of the striped paper from the Cheerful Christmas Addition and score at every 1/2" mark. Accordion fold, adhere the two open ends to form a circle then press down in the center of the folds to form the flower. Adhere a button on top to hold the flower in place and adhere to the bottom right side of the card. Apply the leaf sticker from the Cheerful Christmas Addition to the side of the button.

With a 5” piece of fiber, fold in half and adhere between the two large circles so that the card can hang from the tree!

Finished Size: 5-1/2"

Create Project Using:

Cheerful Christmas US

Cheerful Chirstmas CA